12 & 12A, Jalan Anggerik Mokara 31/E,
Kota Kemuning, Seksyen 31,
40460 Shah Alam,
Selangor, Malaysia.
+603-5124 7726
+603-5131 9144
+603-5131 9144
+60122888360
- 0.1 um & 0.5 um Digital Indicator & Thickness Gauge
- Air Gauge , Jet Plug & Ring , Air Column
- Air Quality Monitor & Data Logger
- Autoclave , Disinfection , Sterilizer
- Bath
- Bench Center ,Concentricity, Flatness , Run Out
- Calibration / Training ¡ª Metrology Service
- Cast Iron & Granite Surface Plate
- Certificate of Calibration , Traceability
- Chiller Refrigerator
- Coating
- Bending Coating Tester
- Bitumen & Mastic Insulation & Peel Adhesion Tester
- Coating Thickness Gauge
- Conical Mandrel Bent Tester
- Dupont Impact Tester
- Erichsen Cupping & Impact Tester
- Film Applicator, Grindometer, Dew Point Meter
- Knife Tester & Surface Profile Gauge
- Pencil Hardness & Buchholz Coating Hardness Tester
- Pin Hole Detector & Pulse Holiday Detector
- Scratch hardness Coating & Scratch Adhesion tester
- Tensile Adhesion, Cross Cut ,Cross Cutter tester
- Viscosity Dip Mug & Density Cup
- Viscosity Flow Cup
- View All
- Color Spectrophotometer , Colorimeter , Color Light Box, Color Cabinet , Gloss Meter
- Concentricity Gauge
- Construction Tester
- Densimeter
- Dimensional Measurement
- 0.0001mm ( 0.1 um ) Indicator
- 3 Point Internal Micrometer / Holtest
- Caliper & Micrometer Checker
- Dial & Digital Thickness Gauges
- Dial Swift Gauge
- Digital Caliper
- Digital Indicator
- Digital Inside & Outside Caliper Gauge
- Digital Level
- Digital Micrometers
- Gauge & Granite Comparator Stand
- Gauge Block
- Granite & Cast Iron Surface Plate
- Height Gauge
- Pin Gauge
- Precision Magnetic V-Block
- Standard Dial Gauges
- Test Indicator
- Thickness Tester
- View All
- Drying Cabinet, Oven, Furnace , Temperature & Humidity Chamber
- Electric Wire, Leather, Paint - Pigment - Ink, Paper - Pulp, Plastic - Rubber, Textile - Dyeing, Universal Tensile Machine
- Electrical Electronic
- Erichsen Cupping & Impact Tester
- ESD , Gauss
- Fabric , Mask, PPE related Tester
- Film Applicator, Grindometer, Dew Point Meter
- Flow Meter
- Force Gauge
- Gas Chromatography
- Gauge , Indicator & Test Indicator
- Gauges & Meters Environmental
- Gelbo Flex Durability Tester
- Glove related Tester
- Hardness Tester
- Haze , Transmittance , Tintometer & Whiteness Meter
- Lab Scientific Equipment
- Laboratory sample preparation equipment
- Laser Micro Gauge
- Loupe , Magnifying Lamp & Microscope
- Magnetic Testing
- Mask, Protective Clothing, Respirator
- Medical Lab Tester
- Melt Flow Tester
- Microscope , Optical Instruments
- Moisture Balance, Moisture Meter
- Natural Latex & Synthetic Latex Tester
- Packaging Tester
- Adhesive Tester
- Air Permeability Tester
- Box Compression Tester
- COF Tester ,Coefficient of Friction Tester
- Dart Impact Tester
- Digital Torque Tester
- Double Light Source
- Flex Durability Tester
- Fogging Tester
- Food Contact Material Overall Migration Tester
- Friction / Peel Tester
- Gas Permeability Tester
- Headspace Gas Analyzer
- Heat Seal & Hot Pack Tester
- Heat Seal Strength Tester
- Hot Tack Tester
- Leak Tester
- Oxygen Permeability Tester
- Rub Tester
- Shrink Tester
- Stripping Tester
- Tearing Tester
- Tensile Tester
- Thickness Tester
- Vacuum Packaging Analyzer
- Water Vapor Transmission Rate Tester
- Others
- View All
- Pinhole & Pulse Holiday Detector
- Plug & Ring Gauge, Spline Gauge, Master Gauge, Taper Gauge
- Ring Pressure sampler, Box Compression tester , Whiteness meter
- Rotary Evaporator
- Safety Equipment
- Salt Spray Tester
- Sample Preparation Equipment
- Sanitizer & Disinfection
- Scientific & Laboratory
- Seal Peel & Melting Tank
- Soil Concrete Cement Rock test equipment
- Spring Tester
- Stability Tester
- Static Control / Eliminators : Ionizer, Blower, Air Gun, Air Bar, Testing Equipment
- Static Honestmeter, Static Decay Analyzer, Dynamic Single Fiber Profilometer
- Stock Clearance (Promotional)
- Surface Protection
- Surface Roughness ,Surface Contour, Surface Profile
- Temperature , Thermal Imaging , Dry Block Calibrator , Humidity
- Tensile Tester ,Compression Tester , UTM , Universal Tensile Machine
- Thickness Tester
- Ultrasonic & Leed Hardness Tester
- Ultrasonic Tester
- Universal Testing Machine
- Vibration Meter
- Video Measuring Scope , Smart Scope , Profile Projector
- Viscosity
- Weighing Balance , Analytical Balance , Standard Weight
- Others
Peacock Industries Sdn Bhd
12 & 12A, Jalan Anggerik Mokara 31/E,
Kota Kemuning, Seksyen 31,
40460 Shah Alam,
Selangor, Malaysia.
12 & 12A, Jalan Anggerik Mokara 31/E,
Kota Kemuning, Seksyen 31,
40460 Shah Alam,
Selangor, Malaysia.
SPG INC. (SPG Öêʽ»áÉç)
1-23-3 Yahiro, Sumida-Ku Tokyo 131-0041, Japan.
+81-3-5655-7030
1-23-3 Yahiro, Sumida-Ku Tokyo 131-0041, Japan.
+81-3-5655-7030
+81-3-5655-7588
sales@spg-network.comErichsen Cupping SE-1520 & Impact Tester STRIKE-U6272
- coating thickness Selangor
- coating test malaysia
- Erichsen Cupping Malaysia
- Impact Test Malaysia
- Coating Thickness Test Malaysia
Erichsen Cupping Tester SE-1520
The device is desgned for testing of elasticity & strength of coatings with cup-shaped curve, according to ISO 1520, ISO 20482:2013.
The Erichsen device is used for determining the strength of the coatings at the indentation of spherical tip punch with diameter of 20 mm in the coating of the sample , the position of which is fixed on the matrix with internal diameter of 27 mm
Impact Tester STRIKE-U6272
is designed for determining the strength of the film durng the impact .
Construction of the instrument is made in accordance with modern requirements of ISO 6272-2002 & ISO 21809.
The device is used for testing of metals, plastics, parquet, wood, ceramics, glass, concrete and screed .
The device is desgned for testing of elasticity & strength of coatings with cup-shaped curve, according to ISO 1520, ISO 20482:2013.
The Erichsen device is used for determining the strength of the coatings at the indentation of spherical tip punch with diameter of 20 mm in the coating of the sample , the position of which is fixed on the matrix with internal diameter of 27 mm
Impact Tester STRIKE-U6272
is designed for determining the strength of the film durng the impact .
Construction of the instrument is made in accordance with modern requirements of ISO 6272-2002 & ISO 21809.
The device is used for testing of metals, plastics, parquet, wood, ceramics, glass, concrete and screed .