WORKING PRINCIPLE

 Fix the test head of Brinell hardness tester to the test frame. When testing, fix the measuring frame onto the surface of the test piece firmly, load force by operating the handle.

The test head is a mini hydraulic system which contains a control valve for controlling force. When force loading to 3,000 kgf, the control valve opens, pressure releasing. According to ASTM standard, force loading should be repeated 3 to 4 times, keeping the pin of the pressure gauge reaching the point of 3,000 kgf 3 to 4 times. In this way, it equals the test regulation of test force 3,000 kgf, 10mm test ball, force maintaining time 10 to 15 seconds.

INSTRUMENT FEATURES

• On-site testing. It could be operated in workshop for its simple operation, easy to carry, used in testing large cylinder workpiece on site.
• Permanent Indentation. Permanent indentation after test is for rechecking.
• High reliability. It completely follows Brinell hardness test principle, reflecting the mechanical property of the test material or parts, the same as desk testers.
• High accuracy. The test force accuracy complies with relevant regulations home and abroad, the same accuracy as desk tester, complying with 1506506, and ASTM El 0 standards.

APPLICATION

• On-site testing of Steel Pipes, Bearings, Gas Cylinders
• Replace inaccurate and unreliable Leeb hardness tester
• Read value of Brinell hardness directly after test with Brinell Indentation Measurement System

TECHNICAL PARAMETERS

STANDARD ASSEMBLY

• Tester
• Load Handle
• Brinell Hardess Block
• 20X Reading Microscope
• 10mm Spare Carbide Alloy Ball
• Chain Measuring Frame
• 1.3m Chain

OPTIONAL ACCESSORIES

• Brinell Hardness Block ( Medium Value, Low Value )
• Carbide Alloy Ball ( 5 mm,10 mm )
• Maintaining Spare Parts ( Hydraulic Oil Capsule, Hydraulic Oil, 0-Ring etc. )
• Maintaining Tools
• Other Specification Chains
• Brinell Indentation Measurement System